$69.99 USD
  1. Famisafe Cam F53
  2. Power Cable
  3. Power Adapter
  4. Set of Mounting Screws
  5. Bracket
  6. Quick Installation Guide
Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into "Warnings" and "Cautions"
Warnings: Serious injury or death may occur if any of the warnin gs are neglected.
Cautbns: Injury or equipment damage may occur if any of the cautions are neglected.

Warnings Follow these safeguards to prevent serious injury or death.
Cautions Follow these precautions to prevent potential injury or material damage.
  • Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
  • In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
  • Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100 to 240 VAC or 5 VDC according to the IEC60 950-1 standard. Please refer to technical specific ations for detailed infornation.
  • Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.
  • Please make sure that the plug is firmly connected to the power socket.
  • If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

Information in this document is subject to change without notice. As our product are subject to continuous improvement,our company reserve the right to modify product design, specifications and prices without notice.

1. Install ‘MIPC’ APP

a. Scan 'MIPC' APP QR code.

b. Download 'MIPC' APP from APP Store(iOS) or Play Store(Android).
Note: PC users please download our APP: www.mipcm.com/download.

2. Add camera to account

a. Plug in device, open the APP, register an account, and log in.
b. Click on '+' in top left corner, select the device model, scan the QR code and add the device ID, and enter the network connection interface.

3. Select network connection

You could choose either Wi-Fi or Ethernet to connect device, but some of devices only support one way.

a. Wi-Fi connection

Click the Wi-Fi connection icon and press the camera RESET button to enter the Wi-Fi configuration mode.Input the Wi-Fi password, the connection should be successful!

1. Press RESET button, hold for 1 -2 seconds to enter the Wi-Fi configuration, long press 10-12seconds to restore the factory settings.
2. If the Wi-Fi configuration fails, try an ethernet connection.

b. Ethernet connection

Click on the Ethernet connection icon, connect the network cable, change the password, and set Wi-Fi.

4. SD card video recording setup

After you insert the SD card (need to be purchased separately) into the camera, you need to go to the "Record' setting to enable video recording.

Step 1 : Enter the camera.
Step 2 : Enter the camera 'settings'.
Step 3 : Enter the 'Record' setting.
Step 4 : Select Recording mode (Continuous Recording/Event Recording).
Step 5 : Enable Recording and tap on 'Apply' to confirm the settings.

Famisafe Cam F53 FAQs

  • When there is the movement, Famisafe Cam F53 sends push notifications or email alerts to you instantly. The siren or customized voice alerts sounds at the same time to warn off the unwanted.

  • Famisafe Cam F53 records videos when it is activated by motion. Motion clips are saved in the micro SD card by default (needs separate purchase) or uploaded to Famisafe Cloud (if you subscribe).

    Also, if you want to record clips or take a photo from live video, you can hit Record/Snapshot button via MIPC App or Client. These pictures and videos will be saved in your phone by default, instead of the SD card.

  • Famisafe Cam F53 supports up to 128GB micro SD card and it also works with Cloud service.

  • Famisafe Cam F53 supports MIPC App on the smartphone (Android 4.0.3 or later & iOS 8.0 or later).

  • Yes, you can view live feed of up to 24 cameras at the same time on MIPC App and up to 24 cameras on MIPC Client.